RECHARGEABLE WORKLIGHT

    Product sheet Return to list
    LED bulb:20 cold light SMD + 20 warm light SMD + 4 red light SMD
    Battery specifications:2 18650 lithium batteries (3.7V, 4400mAh)
    Charging method:USB direct charging (including battery, USB cable, plug)
    Charging time:4.5H
    Charger specifications:5V 2A
    Function mode:warm light/cold light/red light/red light flash
    Mode brightness:300LM/300LM/20LM/-
    Battery lasts for:3H/3H /8H/15H
    Beam distance:23m/23m/-/-
    Waterproof rating:IP54
    Bluetooth signal distance:10m
    Communication system:4.0 (can connect two devices)
    Compatible configuration:A2DP, AVRCP, HFP
    Supported coder/decoder:SBC, AAC
    Working temperature:-20 ℃ to 40 ℃
    Speaker impedance:4Ω (under 20 ℃ , 1.2KHz, 1V)
    Frequency response:193Hz-20KHz
    Speaker rated power:5W
    Sound pressure:84dB
    Specifications:89.5 x 85 x 83.5mm
    Weight: 329g (including built-in battery)
    When the light is on, long press the switch to adjust the brightness (100% -10% or 10% -100%)
    When the brightness is at the maximum or minimum state, the bulb will flash twice
    No operation for 6 seconds, it will turn off after pressing the switch
    The name of the device is "E9390", the device could be connected
    Press the WIFI button and the indicator light will flash, then you can connect with the electronic device
    When connected with electronic equipment, the indicator will stay on; When disconnected, the indicator will flash.
    The device will disconnect and automatically shut down without any operation in 10 minutes
    • PART# WARM/COLD/RED/RED FLASH
      (lm)
      TIMES
      (h)
      PACKING QUANTITY
    • E9390 300/300/20/—3/3/8/151
    【网站地图】【sitemap】